phone_icon.png +27 (0) 11 420 0274 email_icon.pngallen [at] articdriers [dot] co [dot] za (Email Artic Driers)

Dehumidifiers

Air Purifiers


Bry Air - Air Purifier

Data Center AIR PURIFIER

If left unprotected, Your electronic equipment may be damaged 

Protecting the electronic equipment data processing DataCenter Air Puri.er (DAP) centers from any potential environmental threat is a vital step for a data center manager. Even extremely low levels of corrosive gases in data centers can create costly complications, downtime, a non-compliance of electronic warranty speci.cations, failure of electronic Components and sporadic circuit failure, leading to incorrect and lost data in data centers. 


After the introduction of "lead free" law, such as EU directive "on the restriction of the use of certain hazardous substances" ROHS, manufacturers have replaced lead with other substances which are more susceptible to electronic corrosion. As a result, replacing damaged electronic omponents due to micro corrosion can substantially increase a data center's maintenance costs. Due to increasing number of failures where lead free materials are used electronic manufactureshave started asking for:

 

  • ISA G1 class environment for warranty compliance as described by the International Society of Automation (ISA) Standard 71.04-1985 and

 

  • As per recommendation by American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Technical Committee TC 9.9 2011.

 

 

Bry-Air, a leader in Gas Phase Filtration, known for setting new benchmarks, has now introduced a custom designed solution for data centers known as Bry-Air DataCenter Air Puri.er (DAP). With the introduction of Bry-Air DataCenter Air Puri.er (DAP), you can now protect your data center effectively from threat of electronic corrosion and abrupt failures. 


Bry-Air DAP is manufactured to the highest consistency, reliability and ecological standards. Bry-Air DAP houses a revolutionary Honeycomb Chemical Filter as its core heart. This next generation revolutionary new medium is a building block of our new custom designed solution for data centers. Bry-Air macro-porous desiccant formed honeycomb matrix .lter has a high bulk density and very high structural strength as well as adsorption capacity. This honeycomb matrix technology not only reduces the size of DAP but also increases its ef.ciency and life while reducing energy bills. All this provides a much higher capacity chemical .lter with a much longer mean time between replacements (MTBR). 



Some of the salient Features of Honeycomb based Bry-Air Data Center Air Purifier 

  • Only honeycomb .lter with permanganate 
  • Ease in replacement of media .lter Optimum space stilization
  • Ease of operations/maintenance 
  • Very high impregnation of oxidizing agent, resulting in 100% desired output
  • Filters cassettes are made of stainless steel (SS) 
  • Filters are tested in accordance to the standards of ASHRAE 145.2 and ISO 11155-2
  • Energy saving because of very low pressure drop over traditional media 
  • Bry-Air air puri.cation honeycomb bed recirculation/ pressurization units (GPF) are the self-contained units 
  • Bry-Air puri.cation system removes both organic and inorganic contaminants from the air and supplies air free of contaminant gases to the controlled environments 
  • Robust structural CNC fabricated construction & painted unit

Easy to operate

  • Suitable for continuous operation 
  • Manual switch for operating the system. 
  • Easy to handle due to low weight. 

Easy to install

  • Versatile, easy to package and handle. 
  • Small footprint, low volume / weight per CMH 

Easy to maintain

  • Quick and easy to service 
  • Easy honeycomb media replacement 
  • Easy, tool free access to all major components 
  • Quick serviceability and maintenance free operation 


Bry-Air R&D

Comprehensive know-how about the Gas Phase Filtration systems, use and development of innovative
solutions for industry are what makes Bry-Air stand out as a research oriented enterprise. Continuous
investment in research and development combined with extensive application know-how of ourtechnical
experts are the sources of our innovative skills. Bry-Air, recently, set up a state-of-the-art Gas Phase
Filtration laboratory at its Gurgaon Plant. The lab is one of its kind in the world. The lab is equipped with world class technology and systems. It is capable of testing the performance of impregnated/nonimpregnated loose granular media. The tests can be conducted as per ISO/ASHRAE standard 145.1 and BSR/ASHRAE standard 145.2/ISO standard 11155-2 guidelines. 

Desiccant Dehumidifier - FLB Series

Desiccant Dehumidifiers, Desiccant Dehumidifier, Dehumidifier, Industrial Dehumi
Desiccant Dehumidifier

Overview

The Bry Air Fluted Large Bed Dehumidifier FLB series is a one-stop source for total precise environmental control. Bry- Air can design, engineer and package the dehumidifier with

  • Pre and / or after-cooling coils.
  • Bye -pass ducting and mixing chamber
  • Volume controls and filter elements
  • Upgraded fan for total system air to provide complete environmental control in a single package for any industrial application

Key Features

  • FLB comes  with a high performance Eco Dry Metal Silicate Fluted Desiccant Synthesised Rotor.
  • It is manufactured to the highest consistency, reliability and ecology standards.
  • Rotor media, adsorbent, non-toxic, non-flammable, fully water washable
  • Manufactured with state-of-the art CNC turret punch and press brake machine
  • Easy to install
  • Easy to operate
  • Easy to maintain
  • High efficiency and reliability 
Click here to request a quote

Ecodry Desiccant Dehumidifier

Ecodry Desiccant Dehumidifier, Desiccant Dehumidifier
Ecodry Desiccant Dehumidifier

Overview

The new, EcoDry Desiccant Dehumidifier breaks the glass ceiling of the current generation of dehumidification technology with its innovative BRYSMART EMS (Energy Management System).

Save up to 45% Energy

The BRYSMART EMS (patent pending) based EcoDry Dehumidifier series saves up to 45% energy and beyond! This makes the EcoDry Dehumidifier the lowest in cost of ownership in the market today and the most energy efficient!

With its new EcoDry Dehumidifier series, Bry-Air, the inventor of silica gel rotary Dehumidifiers, has set a new benchmark for the industry.

The EcoDry Dehumidifier series incorporates a proprietary technology which optimizes the performance of the system over wide range of conditions. Current generations of Dehumidifers are designed to meet peak load conditions while most applications have considerable off peak hours throughout the year. The technology continuously monitors humidity loads and adjust multiple operating parameters resulting in optimized performance and significant energy saving. The proprietary controls can be optimized for specific application and local climate conditions. This leads to reduction in annual energy consumption significantly and savings are sustainable and unbeatable.

This unique microprocessor based BRYSMART EMS saves energy up to 45% when compared to conventional systems.

The new EcoDry Dehumidifier can be used as stand alone or in combination with pre-cool or / and post-cool module with process bypass configuration for:

  • Space Dehumidification / RH Control
  • Standard Process Air Application
  • Product Drying including Resin Dryers.

BRYSMART EMS (Energy Management System)

  • Optimizes Dehumidifier performance.
  • Reduces annual energy consumption significantly.
  • Savings are sustainable and unbeatable.
  • Provides the lowest cost of ownership of any system in the market with lower annual energy usage and lower maintenance.
  • Can be retrofitted to most installed systems, not just Bry-Air's!

The product is being is being rolled out simultaneously in USA, Europe, China, Japan and Asia.

 

allen [at] articdriers [dot] co [dot] za (Subject: Eco%20Dry%20Dehumidifier%20Quotation%20Required%20) (Click here to request a quote )

Desiccant Dehumidifier - FLi Jr. Series

Desiccant Dehumidifiers, Desiccant Dehumidifier, Dehumidifier, Industrial Dehumi
Desiccant Dehumidifier

 

Overview

The Bry-Air FLi ( Jr.) Desiccant Dehumidifier is your ultimate moisture removal partner. It is a totally self contained unit and is characterized by high efficiency and reliability.

High efficiency and reliability

  • A totally self contained unit.
  • Robust stainless steel frame with double skin construction, internal GI sheet.
  • CNC fabricated with industrial grade coating.
  • High moisture removal.
  • EU-3 grade leak tight filters for air intake.
  • Multiple choice of reactivation heat source: electrical, steam, thermic fluid, direct/ indirect fired gas.
  • In-built process by-pass for custom designing of process air flow or process temperature control.
  • Easy addition of pre/after cooler, high grade filter.
  • Rotor incorporates robust internal structure with perimeter flange for industrial quality and durability.
  • Rotor perimeter flange extend media and seal life.
  • Rotor is non-flammable with organic <2%.
  • Edge hard face coating on rotor edge ensures long life and good sealing for media and seals.
  • Process and reactivation air flow sectors are insulated.
  • Unique PTFE bonded bulb seal design; minimised air leakage.

Easy to operate

  • Suitable for continuous operation.
  • Auto / manual selector switch.
  • volume control dampers for both (P&R) air flow.

Easy to install

  • Versatile, easy to package and handle.
  • Small footprints; low volume / weight per CMH.

Easy to maintain

  • Rotor is water washable.
  • Quick serviceability and maintenance free operation.

Options

  • Humidity control by humidistat on/off.
  • Stainless steel construction.
  • Bry-Smart Controller.
allen [at] articdriers [dot] co [dot] za (Subject: FLi%20JR%20Series%20Dehumidifier%20Quotation%20Required%20) (Click here to request a quote)

Compact Dehumidifier - FFB Series

Compact Dehumidifier, FFB Compact Dehumidifier, Industrial Dehumidifier, Compact
Compact Dehumidifier

Largest capacity range in Compacts - from 170 cmh to 2000 cmh (100 cfm to 1177 cfm). The Bry-Air FFB Series, 170 cmh through 2000 cmh (100 cfm to 1177 cfm) desiccant dehumidifier line is designed to integrate "small footprint and finish" of a commercial unit with "the ruggedness" of an industrial dehumidifier.

ModelCapacity
FFB 170170 cmh
FFB 300300 cmh
FFB 600600 cmh
FFB 10001000 cmh
FFB 15001500 cmh
FFB 20002000 cmh

The BRY-AIR® FFB Compact Dehumidifier is CNC fabricated with powder coated finish and incorporates a high performance fluted metal silicate desiccant synthesized rotor which allows for:

  • Reduced Foot Print.
  • Increased Performance.
  • Lowest Volume/ Weight per CMH.
  • Innumerable mounting options.
  • Light weight, and can be installed above the false ceiling eliminating the need for floor space.
The FFB Compact Dehumidifier removes moisture through a process of continuous "physical adsorption". The moisture is adsorbed in the dehumidification sector by the fluted, desiccant synthesised rotor and is exhausted in the reactivation sector by a stream of hot air in a counter flow.

India Plant is the hub for all manufacturing of FFBs for the Bry-Air Group including USA.

In USA it is sold under the brand name : MiniPAC.
Syndicate content